Disassembly of Other Engine Components

January 11, 2023 /Posted bypower-express / 130 / 0

Oil Filter Disassembly

Remove and discard the oil filter.
Remove the oil filter cover. It should be noted that the oil filter cover of early engines has four mounting screws hidden inside the cover. During disassembly, careful searching is required to avoid omission.

Disassembly of Vacuum Controller (if installed)

Disconnect the air and fuel pipelines, and remove the vacuum controller and the mounting bracket as a whole. During operation, attention should be paid to protecting the pipeline interface to prevent damage to the threads.

Disassembly of Oil Dipstick and Its Bracket

Remove the oil dipstick tube and its mounting bracket. When removing the oil dipstick tube from the bracket, the bracket can also remain on the oil pan connecting plate, and a suitable disassembly method can be selected according to the actual maintenance needs.

Disassembly of External Fuel Filter

Remove and discard the filter element.
Remove the connecting hose between the filter and the fuel pump.
Remove the filter cover and mounting bracket. During disassembly, avoid fuel leakage to pollute the environment or cause safety accidents.

Uncategorized

Disassembly of Engine Flywheel Housing, Oil Seal, and Connecting Rod-Piston Assembly

September 5, 2025 0

Disassembly of Flywheel Housing and Oil Seal Disassembly of Connecting Rod-Piston Assembly To facilitate the removal of the piston pin, Rotate the engine so that... Continue reading

Uncategorized

Disassembly of Engine Oil Pan, Gear Chamber Steel Plate and Flywheel

September 5, 2025 0

Disassembly of Oil Pan and Connecting Box Disassembly of Gear Chamber Steel Plate Disassembly of Flywheel Continue reading

Uncategorized

Disassembly of Engine Camshaft, Turning Device and Oil Pump

September 5, 2025 0

Camshaft Disassembly Turning Device Disassembly Oil Pump Disassembly Continue reading

Uncategorized

Disassembly of Engine Water Pump Transmission Bracket, Damper and Gear Chamber Cover

September 5, 2025 0

Water Pump Transmission Bracket Disassembly After removing the screws and stud nuts, remove the transmission bracket from the gear chamber with a soft hammer at... Continue reading

Uncategorized

Disassembly of Engine Cylinder Head, Cam Follower and Fan Hub

September 5, 2025 0

Cylinder Head Disassembly The cylinder head is assembled with the cylinder block using positioning pins. Remove the screws, lift the cylinder head upward from the... Continue reading

+8615310305680

+30 (0) 1234 56789

Disassembly of Other Engine Components